Installation instructions: MAGIC VISION CONTROL

Installation instructions: MAGIC VISION CONTROL

The requested video is currently unavailable. Please try again later.
Watch again

Please note that the wiper arms need to be moved into a vertical position for the change to be made. Advice on how to do this may be found in the Owner's Manual for your vehicle.

Remove windscreen wiper:

Remove windscreen wiper:

The diagram illustrates how to remove the wiper blade adapter.
The diagram illustrates how to remove the wiper blade adapter.
The diagram illustrates how to remove the wiper blade adapter.

Installing the windscreen wipers:

Installing the windscreen wipers:

The diagram illustrates how to install the wiper blade adapter.
The diagram illustrates how to install the wiper blade adapter.
The diagram illustrates how to install the wiper blade adapter.

Exceptional case: slippage of connector.

The diagram shows the incorrect position of the slipped connector.

Incorrect: the connector has slipped out of place.

The diagram shows the correct position for the connector.

Correct position.

Exceptional case: slippage of connector.

It can happen that the connector for water and power on the wiper arm (with a heated wash/wiper system) slips out of the correct position when the old wiper blade is removed (illus. on left). In this case, please proceed as follows:

  • Press the connector back into the correct position (illus. on right) until you hear it click into place.
  • Install the new wiper.
  • First of all move the wiper arm into the servicing position (illus. 1 of removal instructions) and then back into operating position (illus. 3 of installation instructions), to secure the connection.